Outdoor FO Cable - Page 1 Total 26

China Factory Direct Supply Outdoor FO Cable

FIBERFUTURE® supply 2-144 cores Single Jacket ADSS Cable for self-supporting and duct applications for cable spans 50m, 80m, 100m, 120m, up to 300m, our ADSS optic cable has the characteristics of full dielectric, no metal, non-conductivity, small cable diameter, high tensile force, low linear expansion coefficient, and wide temperature adaptation.

Single Jacket ADSS Cable Span 50M to 200M
FIBERTURE® supply high quality double Jacket ADSS Cable for self-supporting and duct applications for cable spans up to 1000m, our ADSS cable has the characteristics of full dielectric, no metal, non-conductivity, small cable diameter, high tensile force, low linear expansion coefficient, and wide temperature adaptation.

Double Jacket ADSS Cable Span 200M to 1500M
FIBERFUTURE® ASU Cable has a loose tube structure and water-resistant gel compound to provide crucial protection for the fiber. Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel fiber reinforced plastic (FRP) elements are placed on the two sides. The cable is covered with a single PE outer sheath.

Mini ADSS ASU Cable Span 80M, 100M, 120M
FIBERFUTURE® GYTA/S APL PSP Armored Stranded Loose Tube Optical Fiber Cable,The bending insensitive optical fibres are housed in loose tubes that are made of high-modulus plastic and filled with tube filling compound. The loose tubes with smaller size are stranded to form a cable core. The core is armored with laminated aluminum tape. Then a PE outer sheath is extruded.

Stranded Loose Tube Non-armored Cable GYTA
FIBERFUTURE® can customize GYFTA APL Stranded loose tube non-metallic strength member Light Armored Cable from 2-144 core, Support OEM & ODM.

Non-metallic Strength Member Non-armored Cable GYFTA
FIBERFUTURE® GYTC8A/S cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around metallic central strength member into a compact and circular cable core, and the water-blocking materials are distributed into interstices of it. After a APL is applied around the cable core, this part of cable accompanied with the stranded wires as the supporti

Figure 8 Cable With Aluminum Tape GYTC8A
FIBERFUTURE® GYXTC8Y Mini Figure 8 drop Fiber Optic Cable which is an excellent stripping performance of tight buffer fiber Cable, its diameter and bending radius are small. It’s full filling with aramid yarn. It can installation freely in narrow room.This cable consist of the loose tube with single mode or multimode fibers and steel wire as the messenger wire, which are formed like “Figure 8”.

Small Figure-8 Self-Supporting Central Tube Aerial Fiber Optic Cable GYXTC8Y
FIBERFUTURE® GYXTW cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices between them to guarantee the compactness and longitudinal water-blocking performance. Two parallel steel wires ar

Uni-tube Light-armored Cable GYXTW
FIBERFUTURE® The Stranded Type Stainless Steel Tube OPGW Cable is stranded by double or three layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires, Its design is fully adapted to the most common electric line needs.

Stranded Type Stainless Steel Tube OPGW Cable
FIBERFUTURE® The Stranded Type Stainless Steel Tube OPGW Cable is stranded by double or three layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires, Its design is fully adapted to the most common electric line needs.

AL-covered Stainless Steel Tube OPGW Cable
FIBERFUTURE® The PBT Loose Tube Optical Ground Wire (OPGW) is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. Good anti-corrosion performance.Material and structure are uniform, good resistance to vibration fatigue.

Aluminum PBT Loose Tube OPGW Cable
FIBERFUTURE® Central Type Stainless Steel Tube OPGW cable is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is fully adapted to the most common electric line needs.

Central Type Stainless Steel Tube OPGW Cable

FIBERFUTURE designs and manufactures a comprehensive line of outdoor fiber optic cables for aerial, duct, direct-buried applications. Such as ADSS cable, OPGW cable, FTTH drop cable, Figure 8 cable, GYTA, GYTS,GYFTA,GYFTY,GYXTW,GYTA53,GYTY53,GYFTA53,GYFTY53, etc. For more Featured or special structure design fiber outdoor cable, Pls contact us for more information and cable types!

General FAQ

Q

What is your MOQ?

A

Stocked model 1km above Custom length/structure/materials, MOQ 2km-10km
Q

Can I have a custom cable designed and sample order?

A

We provide design service for all clients. MOQ of sample order is subject to the specific design.
Q

What custom you can support?

A

No matter what structure of fiber optic cable you want, based on our 19+ years of extensive experience, we can manufacture it. Single mode, multimode G.652, G.657, OM2, OM3… 1-24 core, up to 288 core Unitube, MLT, CST, SWA… Armored, non armored Tensile, Crush, Span… PVC, LSZH, Flame retardant… 1km, 2km, 4km, 6km… In particular, our production lines supports color stripe on the out sheath of the fiber optic cable, which makes the final product can be distinguished from the vast majority of fiber optic cable on the market.
Q

Can I have my unique design(colors, marks, etc)?

A

Yes, your design such as cable color and marks are all welcome. Just send us color code and marks details.
Q

Can I have a custom cable designed and sample order?

A

We provide design service for all clients. MoQ of sample order is subject to the specific design.
Q

How is package? May i have custom package?

A

Yes, custom package with your authorized company & product information is easy.